Menü
Bize ulaşın
- +90 216 580 84 30
- istanbul@mermeroutlet.com
- Monday – Friday 09:00 – 18:00
1 / 1
Size nasıl yardımcı olabiliriz? Bize yazın.
Technical Specifications
- Ürün Ölçüsü
- 45,7 × 45,7 × 1 cm
- Ürün Uzunluğu
- 45,7 cm
- Ürün Genişliği
- 45,7 cm
- Ürün Kalınlığı
- 1 cm
- Ürün Ağırlığı
- 25,71 kg / m²
- Ürün Kaplama (m² / adet)
- 0,21
- Adet Ağırlığı
- 5,37 kg
- Malzeme
- Marble
- Yüzey
- Honed
- Kenar
- Beveled
- Şekil
- Square
Areas of Use
- Banyo Zemin/Duvar
- Ticari İç Mekan Zemin
- Ticari İç Mekan Duvar
- Dış Mekan Zemin
- Dış Mekan Duvar
- Havuz
- Konut Tezgahları
- Konut İç Mekan Zemin
- Konut İç Mekan Duvar
- Duş Zemin
- Duş Duvar
- Tezgah Arası
- Havuz ve Spa
- Konut Hafif Zemin
* Kullanım önerisi ustanız tarafından onaylanmalıdır; uygulama alanına, montaj yöntemlerine ve genel uygunluğa göre değişir. Mermer Outlet, montaj ve kullanım önerilerinden doğabilecek hiçbir sorumluluğu kabul etmez.
Product Description
The beveled-edge Champagne Honed Marble Tile 45.7x45.7 cm is produced in a 1 cm thickness. The pieces are light cream in tone, fine-grained and without pronounced veining. The honed surface reflects little light; each piece weighs 5.37 kg.
Technical specifications
- Material: Marble
- Finish: Honed
- Shape: Square
- Edge: Beveled
- Size: 45.7 × 45.7 × 1 cm
- Coverage per piece: 0.21 m²
- Weight per square meter: 25.71 kg / m²
- Weight per piece: 5.37 kg
- Applications: Bathroom Floor/Wall, Commercial Indoor Floor, Commercial Indoor Wall, Residential Indoor Floor, Residential Indoor Wall, Shower Floor, Shower Wall, Backsplash, Residential Light-Traffic Floor
Bathroom and shower floors with 45.7 cm square marble
It is used on shower floors, bathroom floors and walls, backsplashes and the indoor floors of commercial spaces. On a shower floor it helps that the matte surface is not as slippery as polished marble when wet. The beveled edges make the grout line between tiles distinct. Other sizes and stones are on the natural stone tiles page, and wet-area products on the bathroom floor and wall page.
Piece count and protection for square tiles
Since each tile covers 0.21 m², about 4.8 pieces are needed per square meter; extra should be ordered for pieces to be cut at the edges. Tone may vary between boxes; mix the tiles and lay them out on the floor before you start setting them. With cream-toned stone, white adhesive is preferred because gray adhesive can show through to the surface. After installation, seal the pores with a sealer and repeat this at regular intervals; on bathroom floors, a pH-neutral cleaner is used instead of acidic products.
