Menü
Bize ulaşın
- +90 216 580 84 30
- istanbul@mermeroutlet.com
- Monday – Friday 09:00 – 18:00
Bize ulaşın
* Kullanım önerisi ustanız tarafından onaylanmalıdır; uygulama alanına, montaj yöntemlerine ve genel uygunluğa göre değişir. Mermer Outlet, montaj ve kullanım önerilerinden doğabilecek hiçbir sorumluluğu kabul etmez.
With Tundra Gray Honed Marble Tile 40.6x61 cm, large areas are covered with fewer grout joints; the tiles are 1.2 cm thick with straight-cut edges, and a single piece weighs 8.22 kg. The unpolished honed surface reflects little light; scratches from daily use are also less noticeable than on polished marble.
Residential countertops and backsplashes, bathroom floors and walls, and home and commercial floors are where Tundra Gray is used; in the shower it is used only as wall cladding and is not recommended for shower floors. Since one side is 61 cm, the number of grout joints is reduced. For this, the subfloor must be flat and a full adhesive bed must be applied under the tile. The tiles are laid in a straight grid or staggered. A large-format option among honed marble tiles.
It covers about 4 tiles per square meter; add a few tiles to the order to allow for cuts and waste. Since each marble tile differs in tone and veining, laying the tiles out on the floor and deciding their positions in advance balances the distribution. Sealer is applied after laying, and a neutral, not acidic, product is used when wiping Tundra Gray tiles. Other marble tiles are on the marble and floor tiles pages.
Sepetiniz boş.